rattle can paint job rifle

A rattle can paint jobIts all in how you prep it and spray it. I wait for a dry day heat the part or gun in front of a radiant heater and heat the cans in water hot from the tap that Ive put in a bucket.

Pin On Hunting

I have read up some and think I am going to go with either VHT engine enamel or VHT brake caliper paint.

. Fog the first few coats on until you get a base allowing to. My motorcycle only got maybe 2500 miles a year on it was garage kept and it looked horrible within a year of the new rattle can paint job. Just swap the flashlight and youll be fine.

Thanks RE-fanger I did go over that but I thought it was more for gun koteduracoat professional finishes that rattle can finishes. I did many rattle can jobs when I was a teenager some looked ok but never really held up very well long term. If youre going to spray it yourself use a HVLP gun and automotive paint otherwise it wont hold up.

Sand the primer out your finest grit and then clean everything up. I may see if my local job shop is open and get auto paint in cans rather than the Rustoleum rattle cans I have. Rattle can has held up for me on several rifles4make sure its clean before you paintof courseanother good tip is heat the paint can up to about 90 degrees for 5 minutes or soboiled water works the bestapply multiply thins coats for best results.

I used Desert Sand for the cream splotches. It lays on flat and overtime gives you an awesome battle worn look. DIY Rattle-Can Camo for Weapons and Other Gear.

Give me some pointers. Im leaning towards a woodland type camo something with some green andor olive drab. The Rust-Oleum Engine Primer Spray creates a durable base that protects your engine and prevents future rust.

And if you look closely it shines just as good as if it were sprayed with a paint gun. Rust-Oleum Automotive Engine Enamel Spray Paint best color for rattle can paint job. The primer is ideal for protecting bare metal rusted surfaces and unfinished metal and plastic surfaces.

The more you use it the more worn or experienced it looks. Do-It-Yourself camouflage with spray paint is easy to do inexpensive requires no fancy gear and doesnt require a ton of skill or experience to do reasonably well. Unlike cerekote which requires stripping the paint and starting all over touch ups are a breeze.

Both Krylon and Rustoleum use proprietary nozzles that require different handles The granddaddy is called a Can Gun. For the dark brown splotches I. The entire body frame and hard top are painted with a rattle can.

Not an AR but still a gun part. It looks great and last a long time. Some naptha on a microfiber cloth pulled all this gak off even though the area looked clean.

Humidity will affect the rattle can paint. Before i painted i sprayed them with a product i got at the auto supply store that you can apply to metal polymer and plastics to help the paint adhere better to the surface. Ive got a wood stock Im going to rattle can soon too.

Still letting the paint dry off but it looks good. Mask off and prime. Believe it or not there is no universal rattle can nozzle configuration.

For those of you who are looking for a more rugged look rattle can is the way to go. I did just a magpul pistol grip and an a1 stock using krylon camo paint. It lays on flat and overtime gives you an awesome battle worn look.

Ive posted it here before how I get my Multicam but here it is again. We all love cerekote. I have a total of 60 in that paint job and if I get some rock or tree rash all I need is a 7 can of paint for a touch up.

Some products can be used over old finishes most cannot. Brett its getting that Tiffany Blue I was talking to you about. Only suggestion I have would be to use a spray can trigger handle that fits the brand of paint you are using.

Im sure you guys have done it. College Student Rifle with Rattlecan Paint Job. The brake paint goes up to about 900 degrees and the engine paint goes up to 500 degrees.

For those of you who are looking for a more rugged look rattle can is the way to go. Rattle up the basecoat paint can ball bearing for at least a minute and then lay it down. Thank u Sent from my iPhone using Tapatalk - now Free.

For a few dollars and a few minutes up to an hour or so you can camouflage weapons holsters knives and other gear sufficient to break up the items inherent. These cans are pressurized like any can of spray paint and they can provide a nice air-dry coating on the firearm. Then i painted and finally over sprayed with a matte clear finish also from the auto store to protect the paint better from chips.

LRB ARMS M15SA Lower PSA 16 Carbine Length Upper Knights armament Grip and Quad Rail Eotech XPS3-20 Olight Odin 2 Blue Force Gear Vickers Sling Car-15 Stock. Im thinking about painting my ar with some type of rattle can camo. And show off your paint jobs.

No need to strip any paint. If you have an aircompressor you can get a cheap paint gun and have a better more durable paint job for less then a case of spray paint. The rattle can is named for the metal balls inside the can that mix up the liquid and create a distinct rattle sound when you shake the can.

Pin On Rifles